![]() The Color Services department is capable of creating custom colors that are unique to the customer’s project, as well as mixing dyes and stains to bring the sample given to life. This service is available in select stores and customers should check with their own store to confirm. If a desired color is not in stock, a custom color can also be matched by their Color Services department. As part of the service, a customer can bring in a sample of the color they are looking for and Lowe’s can match it with a stain from their stock. ![]() Taking the time to do a thorough job will ensure that you get the best results and achieve a look that you can be proud of. When it comes to matching wood stain, patience and accuracy are key. Make any adjustments you feel are necessary, such as adding more coats or adjusting the initial preparation. Allow it to dry and then compare it to the original stain. Buy a small can of a stain similar to the one you are trying to match, and do a small test patch on the wood. It is important to know what type of preparation, application process, and finish were used when the stain was applied to the wood.Ĥ. This can normally be identified by the color and finish.ģ. Determine what kind of stain you are dealing with. This can be done by looking at the wood’s grain pattern, or by testing a small sample of wood with a wood grain identifier.Ģ. Figure out the type of wood you are dealing with. Here are a few steps to follow when trying to match a wood stain:ġ. It is important to keep in mind that the age, type of wood, and how long the stain has been on the wood, all affect the look of the stain. Matching wood stain can be a tricky task if you’re not familiar with the process. In addition, some stores have the ability to store clients’ stain color recipes for future reference. The store can then mix the stain from pre-existing stain ingredients. Many stores use a spectrophotometer, which is a device that compares the color of a client’s sample with the standard range of color swatches in order to accurately match the color. Many paint or home improvement stores will be able to match the stain color you are looking for or create a custom blend that you prefer. ![]() Utility knives can be found at home centers and almost every home center is capable of color matching a paint sample.Įxpert assistance with this segment was provided by Mauro’s Painting.Yes, you can get stain color matched. ![]() To match a paint color, Mauro recommends cutting a small section of the paint away to create a chip to then bringing to a home center or paint store to be color matched. Once painting is complete, save the can or keep a good record of the paint used to paint the room so you don’t have to color match again. ![]() The darker the color, the more likely it will be that you will have to paint the whole wall or even the whole room, since dark colors are nearly impossible to match. Paint the wall or areas requiring touchups as originally planned.Patch and then paint over the chunk cut out for the color scanning.Most locations have a color-matching scanner that can closely reproduce the color of the chip. Take the paint sample to the home center or a paint store.With drywall, it’s easy to cut the paper on the face of the drywall and that can be patched later. Cut out a small sample of the wall in a low-visibility area, like behind a couch or near an outlet.This is a ton of work and requires a back and forth between the paint store and the room being painted. Try holding paint chips up to the wall to see if you can get a close match, though it’s unlikely you’ll be successful with this method.If you can locate a can, it should have the color noted on the lid. Start by checking the basement or the garage in case the previous homeowners left it behind.1-2 hours Steps for matching a paint color ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |